Jay - Page 3

trigger · #21 (**permalink**) 01-19-2006, 09:13 AM

Quote:

Originally Posted by RICEFED

Hey Jay do you have nitto drags or regular sport tires? When your at the track did you happen to drive through the water box? If your looking for traction do not go with bf drag radials. Thats what i'm using and i hate them.

Thats interesting, I'm curious what psi you are running in them? I ran bfg drag radials for a full season and had no problems hooking up leaving at 4k. This was on stock suspension when the motor was making 375rwhp 380ft/lb. I ran 16psi in them and had to put a TON of heat into the tires to get them to hook.

Ta Jay · #22 (**permalink**) 01-19-2006, 09:36 AM

I have drag radials. i was running them at 18psi. i really need relocate brackets and a possible torque arm. are there any bolt in relocate brackets or just weld-in?

RICEFED · #23 (**permalink**) 01-19-2006, 11:24 AM

Quote:

Originally Posted by trigger

Quote:

Originally Posted by RICEFED

Hey Jay do you have nitto drags or regular sport tires? When your at the track did you happen to drive through the water box? If your looking for traction do not go with bf drag radials. Thats what i'm using and i hate them.

Thats interesting, I'm curious what psi you are running in them? I ran bfg drag radials for a full season and had no problems hooking up leaving at 4k. This was on stock suspension when the motor was making 375rwhp 380ft/lb. I ran 16psi in them and had to put a TON of heat into the tires to get them to hook.

I started at 18 and went all the way down to 9. But I'm pushing well over 400 at the rear. I may go with Mickey thompsons I heard alot of good things about their new D/R.

Ta Jay · #24 (**permalink**) 01-19-2006, 11:26 AM

9psi is dangerous. plus im running small side walls 285/35

RICEFED · #25 (**permalink**) 01-19-2006, 11:27 AM

I'm running 275/35/18.

Ta Jay · #26 (**permalink**) 01-19-2006, 11:28 AM

dam! i would like to hook up sooner then 55ft. maybe like 15ft then start haulin ass!!!!!

RICEFED · #27 (**permalink**) 01-19-2006, 11:37 AM

Quote:

Originally Posted by Ta Jay

I have drag radials. i was running them at 18psi. i really need relocate brackets and a possible torque arm. are there any bolt in relocate brackets or just weld-in?

I beleive they have bolt ins but I would still weld with the bolt ins. I have a welder if you decide to get some.

Ta Jay · #28 (**permalink**) 01-19-2006, 11:38 AM

Quote:

Originally Posted by RICEFED

Quote:

Originally Posted by Ta Jay

I have drag radials. i was running them at 18psi. i really need relocate brackets and a possible torque arm. are there any bolt in relocate brackets or just weld-in?

I beleive they have bolt ins but I would still weld with the bolt ins. I have a welder if you decide to get some.

can u weld is the ? i would like to get some

WishIHadACamaro · #29 (**permalink**) 01-19-2006, 11:40 AM

i suck so bad at welding...lol...i need to buy some scrap and practice practice practice.

RICEFED · #30 (**permalink**) 01-19-2006, 11:40 AM

I'm getting alot better but still practicing.