FS: 86 Mustang GT

IBMgoat · #1 (**permalink**) 09-06-2006, 08:58 PM

Im putting this up here for a guy I work with. It's an 86 GT mustang, 5-speed car. Black in color. grey cloth int.

The car has sat for at least two years, there are a few rust spots around the car from age. The odometer reads 55,xxx....but Im guessing it really is 155,xxx. Paint is in nice shape for the age, prolly re-painted at some time. Under the car is VERY solid, and dosnt look like it was driven much if any in the winter, no signs of twisting or accidents. Drivers seat has a tear in the usual spot (side bolster), and there is a crack in the dash (has a dash mat).

Has BBK shorty headers, no cats, no H or X pipe, 2 1/2 piping and Flowmasters. New Alt, Bat, EGR, IAC valve, Fuel pump, Heavy duty radiator, New module, Starter relay, and new cone filter. This is a non-A/C car, and has a SMOG delete. Starts right up instantly, no noises, no smoking, and as far as I know dosnt burn oil. Runs alittle rough, so it will need a tune up and to be driven. Clutch is alittle stiff, might be an aftermarket clutch, but it engages/disengages fine, and the trans goes into all gears without grinding.

I didnt drive the car more than up and down the driveway because it dosnt have plates, but from everything I can see, it is a very straight car for the age. Just needs some TLC, and it would make a great driver, or a great solid project.

He is asking $2500 for it becuase thats what he has into it. The car is located in Hazel Park, MI.

78KingCobra · #2 (**permalink**) 09-06-2006, 09:59 PM

1986 isnt fuel injected, right?

do you have any pics of this vehicle?

im in hte market for a car much liek this. a lightly modified 5.0 in a fox body.

JpMotorsports · #3 (**permalink**) 09-06-2006, 10:29 PM

86 is the first year they had fuel injection.

IBMgoat · #4 (**permalink**) 09-07-2006, 10:48 PM

I can prolly go over and get some pictures of it and have them up there monday....Problem is, he is out of town untill Monday, but if you are interested, then let me know and Ill get pictures for you.

The car is FI, like mentioned above, but it is Speed Density, so in the best interest of performance, it should be converted over to Mass air.

bigwheelinbubba · #5 (**permalink**) 09-08-2006, 01:56 PM

Pics pleeeeese :)

IBMgoat · #6 (**permalink**) 09-08-2006, 05:31 PM

Alright...will definatley get some up by monday.

IBMgoat · #7 (**permalink**) 09-11-2006, 11:05 PM

I talked to the owner today at work. He says that he will email the pics to me, so now Im just waiting on him.

IBMgoat · #8 (**permalink**) 09-13-2006, 10:18 PM

Alright, here are some pictures of the car....sorry not the best quality, they are off my cell.

bigwheelinbubba · #9 (**permalink**) 09-14-2006, 07:26 AM

Any rust areas?? How are the floors, doors and hatch?

IBMgoat · #10 (**permalink**) 09-14-2006, 05:27 PM

There are a few small spots on the 1/4's, but nothing large, and the wheel wells are all solid aswell, which is another common area for rust, Underbody looked to just be dirty, but looked very solid, hatch had a few spots of rust. Non of the rust looked to be that bad actually....all of it in my opinon was easily fixable.