|
9" Rear
I am planning to build a 9" ford rearend,. I have a 4:11 chunk with a mini-spool .I have a housing lined up. How dificult is it to set up the mounts for the lower links and torque arm ? I know I will have to shorten the housing. It would be easier to just order a new one but that is not in my present budget. I also plan on building an adjustable torque arm that will connect to the cross member. Any of you been through this procedure, If so I can use some advice.
__________________
94 camaro All the bolt ons cam still looking for the 11's
|
Linear Mode
