[DYNOJOE]

IT IS POSSIBLE TO ACHIEVE 454 CID OUT OF A TALL DECK 351W. CUBS ARE THE WAY TO GO. IF YOU GO FOR THE SMALLER 347 STROKER, MAKE SURE YOU USE AN ALUMINUM HEAD LIKE AN AFR OR A DART PRO 1. IT IS POSSIBLE TO HAVE 11:1 COMPRESSION AND STILL WORK FINE OFF OF PUMPED GAS. LEAN TOWARD A SOLID LIFT ROLLER OR A MECHANICAL FLAT TAPPET IF YOU WANT TO MAKE POWER INTO THE 6000 RANGE. I BUILD THESE MOTORS FOR A LIVING. IF YOU GO TO ACA-PERFORMANCE.COM YOU WILL SEE A 500+ HP ONE ON DISPLAY. ERSON CUSTOM GRINDS OUR CAMS SO WHEN YOU ARE READY, GIVE ME YOUR MOTOR SPECS, CAR WEIGHT AND GEAR RATIO AND I WILL HOOK YOU UP WITH THE PERFECT CAM . THE BEST PART ABOUT THE STROKER IS TORQUE. IF YOU BUILD IT CORRECTLY, YOU WILL HAVE A TIRE FRIER THAT PULLS LIKE A MONSTER UPSTAIRS.